Bike-Portable with the AX1

Inspired by some blogs I follow, I’ve recently dusted off my Elecraft AX1 antenna and started putting it to use. Until now, I’ve kept it stashed away in my backpack as a backup antenna that I’ve never needed.

So far, I’ve used this versatile little antenna a couple of ways. Most recently, I’ve used it with an old window mount, while operating “stationary-mobile” in my truck. I’ve also used it while “picnic table portable,” using an Elecraft AXT1 tripod mount and my little Ultrapod tripod. If I’m using my KX3, I can use the AXB1 BiPod Mount to support the antenna.

One other use case I wanted to address is operating “bicycle portable.” If I’m out on a bike ride and stop for some radio, it would be handy to use the bike to support the AX1. Browsing around on eBay, I came across an interesting camera mount clamp that looked like it might work well with the AXT1.  

I found this gizmo listed as a “clamp mount ball head” from a company called, SmallRig. It’s a clamp with a standard ¼-20 camera mount, and it works perfectly with the AXT1 tripod adapter. I can fasten the clamp to the handlebars, to give the AX1 some elevation. I would post a link for the clamp, but eBay listings come and go too fast. However, if you search for “clamp mount ball head,” you should find lots of them from a variety of sellers.

This is the camera clamp I used. When coupled with the Elecraft AXT1 tripod mount, it made for a very versatile mount for my AX1 antenna.
This is the camera clamp I used. When coupled with the Elecraft AXT1 tripod mount, it made for a very versatile mount for my AX1 antenna.

To test it out, I packed my radio gear and headed out for my first bike ride of the year. I rode a few miles on the Schuylkill River and Perkiomen trails to a local park. 

The AX1 mounted on the handlebars of my bike.
The AX1 mounted on the handlebars of my bike.

I set up my TR-35 on a bench in the picnic area and mounted the AX1 on the handlebars of my bike. Even with the bike leaning, the clamp’s adjustable swivel allowed me to keep the antenna vertical. I used two radials clipped to the AXT1 tripod adapter with an alligator clip. A six-foot length of RG-8x coax was more than enough to reach the rig. I was on the air in about 3 minutes.

My setup in the park with my AX1 bike mount. I used two 12.5-foot radials attached to the AXT1 tripod mount with an alligator clip.
My setup in the park with my AX1 bike mount. I used two 12.5-foot radials attached to the AXT1 tripod mount with an alligator clip.

The T1 tuner easily tuned up on the 20M band. During my brief stop in the park, I worked POTA stations in Virginia, Illinois, and Georgia. Pleased with my new bike mount, I packed up and continued on my ride. 

I have a feeling I’ll be taking this handy antenna setup along on more bike rides in the future. 

72, Craig WB3GCK

7 thoughts on “Bike-Portable with the AX1”

  3. Oh nice! I have done a couple of bicycle POTA activations but I carry a 19 foot collapsible crappie fishing pole. I strap it to the horizontal top tube of the bike. It rides well, however your clamp mount ball head looks like a much quicker setup.

    73’s hope to catch you on a POTA activation!

    — Mike WB8ERJ

    Liked by 1 person

    Reply

    1. Hi Tim: No, I’ve never operated bicycle-mobile on HF. I would think dragging a wire would be a little tricky, especially on some of the multi-use trails I ride on. I have used an HT while on the bike, though.73, Craig WB3GCK

      Like

      Reply

Leave a comment