Skip to main content

Learn About PFAS

Protecting public health and providing our customers a safe water supply is the City of Vancouver’s top priority, and we currently meet all federal and state requirements for water quality testing. On average, we deliver 10.1 billion gallons per year of clean and safe drinking water to more than 270,000 people in a 72-square mile service area.

Vancouver, like many communities in Washington and across the nation, is addressing an emerging issue with per-and polyfluoroalkyl (PFAS) substances. In recognition of this, Vancouver proactively tested and reported PFAS levels in 2020. In 2023, the City began a new program of testing and reporting for PFAS in drinking water. We continue to share information about PFAS so that you can make informed decisions.

PFAS Overview

Since the 1940s, PFAS have been used around the world in industry and in consumer products such as food packaging, non-stick cookware, waterproof clothing, stain-resistant fabrics and firefighting foam. These synthetic chemicals can enter the environment and water supplies from multiple sources and do not break down easily, which is why PFAS are sometimes called “forever chemicals.”

U.S. Environmental Protection Agency Final National Primary Drinking Water Regulation and PFAS Maximum Contaminant Level

On April 10, 2024, the U.S. Environmental Protection Agency (EPA) announced the final National Primary Drinking Water Regulation for six PFAS compounds. These regulations set the Maximum Contaminant Levels (MCLs) for PFAS in drinking water. Public water systems must monitor for these PFAS and provide information to community members. Public water systems will have five years (by 2029) to implement solutions to reduce these PFAS if monitoring shows that drinking water levels exceed the MCLs. Beginning 2029, public water systems that have PFAS in drinking water exceeding the established MCLs must take action to reduce levels of PFAS in their drinking water. Federal regulations set by the EPA supersede the Washington State Action Levels. View MCLs set by the EPA.

PFAS Detection

Quarterly Update – February 2025: Drinking water samples collected from Vancouver Water System (ID#91200) sources included detections of the following per- and polyfluoroalkyl substances (PFAS) that were above Maximum Contaminant Levels (MCLs) for drinking water, as determined by the Environmental Protection Agency (EPA).

The levels of PFAS found in Vancouver’s water supply are above recommended limits in state and federal guidance. The recommended limits are based on long-term exposure to PFAS throughout a person’s life and represent a conservative level at which no adverse impacts are expected over a lifetime of drinking the water, even in health-sensitive populations.

The City of Vancouver’s extensive water system has 40 wells located at nine wellfields across our community. Recent testing for PFAS showed that eight of nine of the City’s wellfields exceeded the MCLs for PFAS contaminants regulated by the EPA. These water production sites include Water Stations 1, 3, 4, 7, 8, 9, 14 and 15. The latest compliance sampling results are below.

Water StationPFOA ResultPFOA EPA 4 pptPFOS resultPFOS EPA 4 ppt
Water Station 12.5 pptBelow4.9 pptAbove
Water Station 32.7 pptBelow5.2 pptAbove
Water Station 46.0 pptAbove17 pptAbove
Water Station 7NDBelow4.5 pptAbove
Water Station 84.4 pptAbove9.2 pptAbove
Water Station 95.4 pptAbove11 pptAbove
Water Station 148.8 pptAbove17 pptAbove
Water Station 155.2 pptAbove12 pptAbove
EllsworthNDBelowNDBelow

*ppt-parts per trillion (1 ppt is equivalent to a single drop of water in 20 Olympic-sized swimming pools)

Potential Health Impacts

There are many different PFAS, and we are still learning about their health impacts in people.

City Actions to Protect Water Quality

The City hired water quality experts to investigate possible sources and the extent of PFAS in the water supply and started work to identify potential treatment options. Work underway includes:

Keeping You Informed

The City is committed to keeping the community informed. We will continue to share actions the City is taking to keep your water safe and provide updates as we learn more about treatment options and receive updates from federal and state authorities. Timely information and PFAS sampling results will be posted at cityofvancouver.us/pfasresults. The annual Water Quality Report is another way you can learn about the quality of the City’s water and PFAS updates.

Products commonly containing PFAS include: food packaging, microwave popcorn, cosmetics, non-stick cookware, water resistant clothing and shoes, personal care products and toiletries, paints, stain resistant carpet fabrics and furniture, pesticides, photography.

PFAS Finalized Federal Maximum Contaminant Levels / State Action Levels

Types of PFASEPA
Maximum Contaminant Level (Enforcable, Requires treatment by 2029)
Washington Department of Health
State Action Level (Superseded)
PFOA4 ppt10 ppt
PFOS4 ppt15 ppt
PFNA10 ppt9 ppt
PFHxS10 ppt65 ppt
HFPO-DA (commonly referred to as GenX Chemicals2)10 ppt
Mixtures containing two or more of PFHxS, PFNA, HFPO-DA and PFBSHazard index of 1*PFBS, 345 ppt

Note: ppt = parts per trillion (1 ppt is equivalent to a single drop of water in 20 Olympic-sized swimming pools)

11 ppt (part per trillion) is equivalent to a single drop of water in 20 Olympic-sized swimming pools

2GenX chemicals are not on the Washington State Department of Health’s list of PFAS with State Action Levels

3EPA intends to provide water systems with a web-based form that will automatically calculate the Hazard Index for four types of PFAS together

*The hazard index of 1 is the level at which no known health risk could be anticipated

The City has been proactively engaging on this issue for compliance sampling and reporting. Below is a brief history of the City’s sampling efforts to better understand potential PFAS impacts.

Evolving Science and Regulations

Public Health Resources

Reducing Exposure

Frequently Asked Questions