TECHNICAL BULLETIN

ME Direct Feed Control Panels Discontinued

TB #: TB-22-04

Date: April 14, 2022

Product Lines Affected: ME Series

Overview

Condair’s evaporative media product line is currently available in the following configurations:

ME Direct Feed
ME Control
MC Series

ME Direct Feed

The standard version includes the evaporative module and a hydraulic manifold without valves. The hydraulic manifold must be equipped with both a drain and a supply valve (available as options), and a customer-supplied On/Off control unit.

If stage control is required, the hydraulic manifold can be equipped with optional stage valves (in addition to the drain and supply valve), as well as a purge valve in the water supply line. Stage control unit must be supplied by the customer.

All valves are available as options or must be supplied by the customer.

Additionally, two optional control units - one for On/Off control and one for stage control are available.

ME Control

Complete system with software configurable control unit with display, capable of both On/Off and stage control. Hydraulic module(s) with pumps can be mounted internally or externally to the AHU/duct.

MC Series

Complete system with control unit capable of both On/Off and Stage control. Hydraulic module with pumps is mounted internally to the AHU/duct.

The ME Direct Feed control units (highlighted) will be discontinued as of April 11th, 2022, due to low sales interest and increased water efficiency of the remaining models. The ME Control, MC, and standard version of the ME Direct Feed (including optional valve kits) continue to be available.

The ME Control and MC system recirculate water throughout the system using pumps in the evaporative module, periodically draining to reduce mineral build-up. The ME Direct feed is a flow-through system where water is drained after flowing down the evaporative cassettes.

In addition to the benefit of water efficiency, the MC Series also offers increased cost-effectiveness thanks to its optimized design. Engineered to minimize the amount of material required, a single unit can deliver up to 793 lbs/hr of humidification and approximately 245kW/h of adiabatic cooling, operating on less than 0.15kW of electrical energy.

For any questions or for advice on any humidification projects, please do not hesitate to reach out to our Application Engineering team at na.applications@condair.com.

Best regards,

Karly Treleaven

Technical Product Manager

_________________________________________

Office: +1 613 822 0335

Karly.Treleaven@condair.com

Manage your preferences | Opt out using TrueRemove™
Got this as a forward? Sign up to receive our future emails.
View this email online.

2740 Fenton Road
Ottawa, ON | K1T3T7 Canada

This email was sent to emma.flinn@condair.com.
To continue receiving our emails, add us to your address book.